OODA-903Q

Price: Contact us

Product Components: EVA resin, tackifying resin, paraffin, additives, etc.
Product Features: Prevention of Yellowing. / Good initial adhesion. / Good re-melting. / Moderate open period. / Good Water Resistance. / Good Age Resistance. / Good Oxidation Resistance.
Scope of Application: Prevention of Yellowing EPE (expanded plastic). / Plastics.

Performance Indicators:

Physical Properties Specification Values Test Method
Appearance White Translucent Granular Visual
Softening Point 81± 3 Ring and Ball Method
Opening Time 3~50 Seconds
Initial Curing Time 15~25 Seconds
Viscosity180℃) 13500 ± 500 CPS Viscometer of Type B
Hardness 76 JIS
Peel Strength 12Kg/cm2 Ceramic and Other
35Kg/cm2 PVC and PVC

Method of Use:
1 Temperature control: The operating temperature is usually controlled between 160 ~ 180 , but not exceed 220 . Check the temperature regularly, and use laboratory thermometer , metal thermometer, electrode thermometer directly and systematically. If necessary, readjust it again. Because of long time working,, the thermometer installed on the machine may give the wrong information.
2
Lining speed: 12~15 m/min, according to the width of the edge, low speed can lead to errors.
3
The consumption of hot melt adhesive for sealing side : 300~400g/m2
Packing and Storage: Paper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years.
Note:
1 Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength.
2
The temperature of the melting system is high, please do not touch it with your hand in order to avoid scald.
3
If the glue drop on the skin, the burnt part should be immediately immersed in cold water for at least 15 minutes and then sent to hospital to be treated.