OODA-902P

Price: Contact us

Product Components: EVA resin, tackifying resin, paraffin, additives, etc.
Product Features:  Suitable for high speed straight line edge bonding.
Scope of Application: Wood high speed edge bonding.

Performance Indicators:

Physical Properties Specification Values Test Method
Appearance White Translucent Granular Visual
Softening Point 92± 5 Ring and Ball Method
Opening Time 3~25 Seconds
Initial Curing Time 3~15 Seconds
Viscosity180℃) 26000 ± 1000 CPS Brookfield 27#
Hardness 62 JIS
Peel Strength 12Kg/cm2 Ceramic and Other
  35Kg/cm2 PVC and PVC

Method of Use:
1 Temperature control: The operating temperature is usually controlled between 170 ~ 190 , but not exceed 210 . Check the temperature regularly, and use laboratory thermometer , metal thermometer, electrode thermometer directly and systematically. If necessary, readjust it again. Because of long time working,, the thermometer installed on the machine may give the wrong information 

2
Lining speed: 12~15 m/min, according to the width of the edge, low speed can lead to errors.
3
The consumption of hot melt adhesive for sealing side : 300~400g/m2
Packing and Storage: Paper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years.
Note:
1 Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength.
2
The temperature of the melting system is high, please do not touch it with your hand in order to avoid scald.
3
If the glue drop on the skin, the burnt part should be immediately immersed in cold water for at least 15 minutes and then sent to hospital to be treated.