Product No: OODA-630
Product Components: EVA resin, tackifying resin, paraffin, additives, etc.
Product Features: Medium temperature and medium speed / Allotype edge bonding. / Suitable for use on thicker sealing strips.
Scope of Application: Wood edge bonding.
Performance Indicators:
| Physical Properties | Specification Values | Test Method |
| Appearance |
Milky White Granular
|
Visual |
| Softening Point | 89℃ ± 5℃ | Ring and Ball Method |
| Opening Time | 3~50 Seconds | |
| Initial Curing Time | 3~10 Seconds | |
| Viscosity（180℃） | 19300 ± 500 CPS | Brookfield 27＃ |
| Hardness | 76 | JIS |
| Peel Strength | 12Kg/cm2 | Ceramic and Other |
| 35Kg/cm2 | PVC and PVC |
Method of Use:
1Temperature control: The operating temperature is usually controlled between 160 ℃~ 180 ℃, but not exceed 220 ℃. Check the temperature regularly, and use laboratory thermometer , metal thermometer, electrode thermometer directly and systematically. If necessary, readjust it again. Because of long time working,, the thermometer installed on the machine may give the wrong information.
2 Lining speed: 12~15 m/min, according to the width of the edge, low speed can lead to errors.
3 The consumption of hot melt adhesive for sealing side : 300~400g/m2.
Packing and Storage: Paper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years.
Note:
1 Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength.
2 The temperature of the melting system is high, please do not touch it with your hand in order to avoid scald.
3 If the glue drop on the skin, the burnt part should be immediately immersed in cold water for at least 15 minutes and then sent to hospital to be treated.
